XVHD-FX. Radio Control, Data link and Full HD Video System 2.4Ghz.

Radio Control, Data link and Full HD Video System 2.4Ghz. The XVTR aerial unit has HDMI/Ethernet/AV and other video interfaces, 2 UART interfaces and 1 SBUS output interface. The ground unit XVRE has HDMI/Ethernet (RJ54), 2 UART interfaces and 1 SBUS input interface. The serial port supports Mavlink protocol and transparent protocol. Both units have AES128 encryption. For Radio Control: You can use a standard transmitter and connect it through the SBUS of the XVRE ground unit. Then on the XVTR Aerea unit you can connect the SBUS to an autopilot (Cube, Pixhawk, APM…) or similar device. For mavlink telemetry or transparent data link: You can connect the UART of the XVTR air unit to the telemetry port of the autopilot (Cube, Pixhawk, APM) or other device. Then on the XVRE ground unit you can connect it through the UART (Using a TTL – USB serial converter to connect it to the PC) or through Ethernet (UPD or TPC) (You can also watch the video at the same time) and connect to any software like Mission Planner, QGroundControl or similar. For Video: On the XVTR air unit you can connect to the camera or gimbal via HDMI or Ethernet. Then on the XVRE Ground unit you can connect a screen via HDMI or through the Router or PC to Ethernet. If it is required to obtain more range in Radio Control and Telemetry, then a second integrated system can be used at 433Mhz or 863-950Mhz with a range of 250Km (LOS) that will work together with a GCS XLRS, this will work at the same time with the system 2.4Ghz, consult about the XVHD-SAT product. Note: To obtain these ranges it is necessary to use a SATPRO tracker antenna or similar.   Delivery date: Can be shipped within 30-45 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.